CDwest.ca on Facebook  CDwest.ca on Twitter  CDwest.ca Blog
 

CALL TOLL FREE: 1.866.530.0770
FACTORY DIRECT CD MANUFACTURING and CD DUPLICATION

 
HOME PRODUCTS START YOUR ORDER RESOURCES TEMPLATES CONTACT US
1. ORDER FORMS 2. MAKE PAYMENT 3. MASTER CONTENT 4. IPR FORM 5. ARTWORK 6. SUBMIT ▪ UPLOAD
 

Design Instructions: CMYK Inkjet Disc Printing (1-199 Discs)

Before You Begin: The production assets you supply to us are deemed to be in final form. This means you have checked them thoroughly and confirm they are ready-to-manufacture without the need for modifications.

Design Software:

We strongly recommend you use either Adobe Illustrator or Adobe Indesign for general layout and typesetting, and Adobe Photoshop for processing your photos/images. Free fully functioning 30 day trials of these programs can be downloaded from adobe.com

Design Templates:

You designs must be supplied on the appropriate CDwest.ca design templates. We can not accept the templates from other manufacturers or ‘home made’ templates.

Basic Design Rules:

Important: When using solid black in your design for backgrounds, text or graphics, please do not exceed the following CMYK colour
   values: C:25 M:25 Y:5 K:100.

The template should be positioned as the top layer in your Layer Menu so you can always see it for visual reference while you are designing.
Colour mode for page properties, colour values and images: CMYK
Resolution for page properties and images: 300 dpi (or ppi)
Always allow 1/8” (3mm) of bleed past the finished edges of your design (see Image #1 below).
Don't crowd the edges with text - using a margin of no less than 1/8" (3mm) is generally recommended.
The ink density for the colours in your design should not exceed 300%. You can determine the ink density for any colour by adding up the  
   individual CMYK values of the colour. For example: The total ink density of C:100 M:98 Y:19 K:16 equals 233%.
When using transparencies, gradients, drop-shadows or anything less than 100% solid colour, the tonal range must be between 15% and 85%
Flatten/rasterize any transparencies you create in your design.

Text:

Minimum recommended type size for dark coloured lettering on a light coloured background: 5 points
Minimum recommended type size for light coloured lettering on a dark coloured background: 6 points
For best print results avoid using fonts with thin/fine strokes for small text (especially when using light text on a dark background).
If using Photoshop: Small text and line-art created in Photoshop tends to look fuzzy when printed so we recommend you do not use
   Photoshop for typesetting or creating line-art. For best results, process your photos/images in Photoshop and then import them into Adobe
   Illustrator or Indesign where you can assemble them within the design template and add your typsesetting.

Image #1: The red circles in the design template represent the maximum
printable area, but your design must 'bleed' or extend past the red circles
by at least 1/8" (which is represented by the
blue circles).


 


When Your Disc Design Is Completed

STEP 1  Embed Your Photos/Images

Illustrator and Indesign: Go to your Menu Bar, select 'Window' and then select 'Links' to open the Link Menu on your screen. Click on an image in your design, click on the Menu button in your Link Menu and then click on 'Embed Image'. Repeat as required for other photos/images in your design.

Photoshop: Rasterize each image layer in your Layer Menu.


STEP 2  Covert Text To Outlines

To avoid font substitution errors please convert all of your text into 'outlines'. In the image shown below the word "Text" on the left has not been outlined, and the word "Text" on the right has been outlined.

Illustrator and Indesign: Select all text, go to your Menu Bar, select 'Type' and then select 'Create Outlines'.

Photoshop: Rasterize each individual font layer in your Layer Menu. 


STEP 3  Turn Off The Template Layer

When you have finished your design please turn off the "Template" layer in your Layer Menu - after doing so the template's red circles and blue circles should have disappeared. The "Registration Mark" in the center of the template must remain visible so do not cover it, delete it, or turn that layer off.

In the image shown below, the Template layer has been turned off but the Registration Mark layer is clearly visible. This is how we want the design file supplied to us.


STEP 4  Saving Your Design

You must save your design as a high resolution PDF. Please name your artwork file with your order number and the product name. For example:  32543_CD.pdf

In your Menu Bar select "File", then "Save As" and then select the PDF file format. A dialogue box will then appear (see example shown below) and in the "Adobe PDF Preset" field you select the "High Quality Print" option. Then click "Save PDF".


 


STEP 5  Artwork instructions for your disc packaging products are located here.

 

 


 


Home  CD Packaging in Canada  CD Replication  Vinyl Record Pressing  USB Sticks in Canada  Contact Us

© 2012 CDwest.ca   ▪   CDwest.ca is a brand of Precision Disc Manufacturing Corp.